|
|
HP08-2S 2Cells Outrunner Brushless Motor
(Mounting Screws and pinion are Included.)
This is a 2 cells version of HP08S. You need two batteries to run it and certainly this is
the most powerful motor for your 4G3 or 4G6.
Weight: 8.4g (Included wires weight)
Size (Diameter): 13.8mm
Shaft (Diameter): 1.5mm
Item No: HM-4G6-HP08-2S
(Pinion is included but not installed. Please use super glue on it. Mounting screws are also included.)
Price: US$44.95
|
|
|
HP06VX (HP07xx) Outrunner Brushless Motor
(Mounting Screws and pinion are Included.)
This is powerful motor. It is one cell motor but can provide 2 cells motor's power!
Weight: 6.2g
Size (Diameter): 13.8mm
Shaft (Diameter): 1.5mm
Item No: HM-HP7-HP06VX
(Pinion is included but not installed. Please use super glue on it. Mounting screws are also included.)
Price: US$41.95
|
|
|
HP08S Outrunner Brushless Motor
(Mounting Screws and pinion are Included.)
Factory understood people want more power on their 4G3. They design and produce this super
power 1S outrunner brushless motor. This powerful brushless motor will be powerful enough for any challenge of
3D flying!
According, this powerful brushless motor, it needs higher power. Our 20C CJ Power battery is necessary. It can
provide all 3D flying.
Please consider if such high power motor is necessary before place order.
Weight: 8.4g (Included wires weight)
Size (Diameter): 13.8mm
Shaft (Diameter): 1.5mm
Item No: HM-4G3-HP08S
(Pinion is included but not installed. Please use super glue on it.)
Price: US$41.95
|
|
|
HP06S Outrunner Brushless Motor (Mounting Screws and pinion are Included.)
It is the very powerful brushless motor that can have 4G3 able to have all 3D flying. (Included
the 2.9g (HP03T) or HP02T brushless tail motor, it can fly exactly as large 3D heli does.) According, this powerful
brushless motor, it needs higher power. Our 20C CJ Power battery is necessary. It can provide all 3D flying.
Please consider if such high power motor is necessary before place order.
Weight: 6.2g
Size (Diameter): 13.8mm
Shaft (Diameter): 1.5mm
KV: 11500
Item No: HM-4G3-HP06S
(Pinion is included but not installed. Please use super glue on it.)
Price: US$36.95
|
|
|
HP05S Outrunner Brushless Motor (Included mounting screws, pinion, and plug compatible with Walkera Speed
Controller)
This outrunner comes with 16T pinion and it can bring your 4#3B with 11 minutes flight time!
This powerful outrunner has low heat. Unlike Walkera inner brushless motor, all energy is used on the flight time
but not creating heat.
It has plug that compatible with Walkera Speed Controller or AeoRC 5A Esc (Please Select). Just plug and play on
your brushless version 4#3B. 2 Mounting screws are included.
Please notes: Pinion and plugs are installed! However, Walkera's esc is not good for outrunner brushless
motor. It may not startup well! XP-07A esc is suggested. Please consider the esc before purchase. It is not returnable
if it cannot run on your Walkera's esc.
Weight: 5.3g
Size (Diameter): 14mm
Shaft (Diameter): 1.5mm
KV: 10000
Item No: HM-43B-HP05S
Price: US$31.95 Now
Only US$26.95
|
|
|
XP-7A Esc for HP06S/HP08S
This 7A esc is programmable. Factory helped me to re-set and pre-programnmed for HP06S. Below
has suitable plug for Walkera's esc.
Item No: HM-ESC-XP07A
Price: US$13.95
|
|
|
Program card for XP-7A esc.
This program card is from the same factory of XP-7A. Although my XP-7A is set for HP06S and
HP08S in factory, some customers may want have different setting.
Item No: HM-ESC-ProgramCard
Price: US$12.00
|
|
|
HP02T Outrunner Brushless Motor
This outrunner brusless motor is as powerful as HP03T 2.9g outrunner brushless motor. The
weight is 2/3 of HP03T only. 1g lighter on the tail may bring very different flying experience! It has wires included
and long enought for 4#3B/4G3 tail boom. It is fit on 4#3B tail holder or HP03T Motor Holder for 4G3. Also, the
tail rotor of 4#3B/4G3 can be put on the shaft directly.
Weight: 2g
Size (Diameter): 13mm and 5mm
Shaft (Diameter): 1mm
Item No: HM-02T-BLTail
Price: US$28.95
|
|
My Full brushless 4#3B:
|
2.9g Outrunner Brushless Motor
This outrunner is best tail brushless solution. It has wires included and long enought for
4#3B/4G3 tail boom. It is fit on 4#3B tail holder. Also, the tail rotor of 4#3B/4G3 can be put on the shaft directly.
Weight: 2.9g
Size (Diameter): 13mm and 5mm
Shaft (Diameter): 1mm
KV: 8000, 20g
Current: 1.2A/0.2A
Item No: HM-29G-BLTail
Price: US$24.95 (Price does not include Tail Rotor & Motor Holder)
|
|
|
Carbon Fiber 2.9g/HP02T Brushless Motor Holder for 4#3B
This package included:
High Quality Carbon Fiber Fin 2.9g or HP02T Brushless Motor Holder
Metal Lock + 2 Screws
This high quality carbon fiber motor holder is specially made for 4#3B.
If you need it for 4G3, please go to 4G3 BL Motors &
ESC Session .
Item No: HM-43B-MotorHolder
Price: US$14.95 (Price does not include Tail Rotor & Motor)
|
|
|
Carbon Fiber 2.9g/HP02T Brushless Motor Holder
This package included:
High Quality Carbon Fiber Fin 2.9g or HP02T Brushless Motor Holder
Metal Lock + 2 Screws
Total is around 0.7g Only.
Item No: HM-4G3-MotorHolder
Price: US$14.95 (Price does not include Tail Rotor & Motor)
|
|
|
Walkera KV11000 Brushless Motor
(This Brushless Motor is exactly the same as 4G3 using.
Finally I have tested it and found the pinion on brushless motor can be matched with 4#3B main gear and also 4G3
main gear.)
Item No: HM-4#3B-Z-33
Price: US$25.00 Now
Only US$16.50
|
|
|
Walkera 10A Brushless Speed Controller
(This Brushless Speed Controller is exactly the same as 4G3 using.)
Item No: HM-4#3B-Z-34
Price: US$
Price: US$20.00 Now
Only US$12.50
|
|
|
Walkera Tail Brushless Motor WK-WS-10-001
Item No: HM-4#3B-Z-37 (For 4#3B and CB100)
Price: US$17.50
|
|
|
Walkera Tail Brushless Motor WK-WS-10-002
Item No: HM-4G3-Z-42 (For 4G3)
Price: US$17.50
|
|
|
Walkera Speed Controller for Tail Brushless Motor 10A-LT
Item No: HM-4G3-Z-43
Price: US$15.00
|
|
|
Tail Motor Wire Brushless Version
Item No: HM-4G3-Z-44
Price: US$3.00
|
|
|
Walkera 14T Main Motor Pinion for 1.5mm Shaft
Item No: HM-4#3B-Z-43
Price: US$2.80
|
|
|
AeoRC Brushless Conversion + 5A ESC
This brushless conversion and esc can also run with other outrunner brushless motor. Factory
told me it could run the tail brushless motor. However the plug is different between the HP05S that I am selling.
Solder work may be needed. (I have tried on ADH50 and ADH50L only without trying on others brushless motors as
extra soldering work needed.)
Item No: HM-ESC-BRUSHLESS
Price: US$22.95
|
|
|
AeoRC ADH50 (C05 New Improved Version) Outrunner Brushless Motor
The shaft in 1mm diameter because this can have stocked Walkera pinions used on it. 4#3B
is 1mm dismater.
ADH50 (C05) is new improved version. It is lighter and smaller.
Shaft (Diameter): 1mm (Stock Pinion Can be Used)
Mounting Screws are included.
Thrust: 90g
KV: 11300
Item No: HM-C05-BLMotor
Price: US$24.95 ONLY $21.95 Now
|
|
|
AeoRC ADH50L (C06 or C05L) Outrunner Brushless Motor
This is a powerful outrunner. It is around 6g in weight and bring more power than ADH50.
It is suitable for 4G3 flying as well. Aero 5A esc can be used as a set without any soldering on Brushless 4#3B
or 4G3.
Brushless Conversion + 5A ESC can also be used with this motor without any soldering for Brushed Version 4#3B.
Shaft (Diameter): 1.5mm (Metal Pinion Can be Used)
KV: 11500
Item No: HM-C06-BLMotor
Price: US$24.95 ONLY $19.95 Now
SOLD OUT
|
