[Contact me]

Welcome to my hobby store. I'm selling Walkera parts because flying these are my hobby.
I have ordered many parts at low cost & want to share the savings with all of you that share my interests.
I also sell on Ebay but Ebay service charges are so expensive I cannot sell parts there at the lowest overall prices.
No matter how many parts you order--
The worldwide insured shipping is ONLY US$5.

Walkera 4#3/A/B Parts
Some of 4#3, 4#3A, and 4#3B parts are the same. Parts are in pink cells can be used on 4#3, 4#3A, and 4#3B. I will send the most updated version from factory!

Metal Upgrade 4#3B parts set for 4#3
This set of upgrade parts has four 4#3B parts:
4#3B CNC Blade Holder HM-4#3B-Z-05
4#3B Metal Balance Bar HM-4#3B-Z-06
4#3B CNC Rotor Head Whole Set HM-4#3B-Z-09
4#3B CNC Swashplate HM-4#3B-Z-10

Item No: HM-4#3-UPGRADE
Price: US$29.99

Upgrade 4#3A parts set for 4#3
This set of upgrade parts has four 4#3A parts:
4#3A Blade Holder HM-4#3A-Z-05
4#3B Metal Balance Bar HM-4#3B-Z-06
4#3A Rotor Head Whole Set HM-4#3A-Z-09
4#3B Swashplate HM-4#3A-Z-10

Item No: HM-4#3-UPTOA
Price: US$14.99

4#3 Parts

4#3B Parts

4#3A Parts

4#3 Main Rotor Blade
Item No: HM-4#3-Z-01
Price: US$3.50

4#3A/B Main Rotor Blade
Item No: HM-4#3AB-Z-01
Price: US$4.50

4#3(A/B) Flybar Paddle
Item No: HM-4#3-Z-02
Price: US$2.50

4#3 Tail Rotor
Item No: HM-4#3-Z-03
Price: US$2.50
Now Only : US$1.90

4#3A/B Tail Rotor
Item No: HM-4#3AB-Z-03
Price: US$2.50

4#3(A/B) Flybar Connector
Item No: HM-4#3-Z-04
Price: US$2.00

4#3 Main Blade Holder
Item No: HM-4#3-Z-05
Price: US$2.50
Now Only : US$1.90

4#3B CNC Blade Holder
Item No: HM-4#3B-Z-05
Price: US$9.00

4#3A Blade Holder
Item No: HM-4#3A-Z-05
Price: US$3.00

4#3 Balance Bar
(4#3A and 4#3B can use it.)
Item No: HM-4#3-Z-06
Price: US$2.50
Now Only : US$1.90

4#3B Metal Balance Bar
(4#3 can also use.)

Item No: HM-4#3B-Z-06
Price: US$3.50

4#3 Rotor Head Ring
Item No: HM-4#3-Z-07
Price: US$3.50

4#3(A) Linkage Set
Item No: HM-4#3-Z-08
Price: US$4.50

ONLY 4#3B Linkage Set
Item No: HM-4#3B-Z-08
Price: US$4.50

4#3(A) Linkage Set
Item No: HM-4#3-Z-08
Price: US$4.50
US$4.50

4#3 Rotor Head Set
Item No: HM-4#3-Z-09
Price: US$5.50

4#3B CNC Rotor Head Set
(Whole Set included Rotor Ring and Main Shaft)
Item No: HM-4#3B-Z-09
Price: US$14.50

4#3B CNC Rotor Head ONLY
(It has Rotor Head, Collar, Two O-Rings, and Two C Clips)

Item No: HM-4#3B-Z-09ONLY
Price: US$10.50
Now Only US$8.50
(Limited Offer)

4#3A Rotor Head Set
(Whole Set included Rotor Ring and Main Shaft)

Item No: HM-4#3A-Z-09
Price: US$6.00

4#3 Swashplate
Item No: HM-4#3-Z-10
Price: US$4.50

4#3B CNC Swashplate
Item No: HM-4#3B-Z-10
Price: US$10.50

4#3A Swashplate
Item No: HM-4#3A-Z-10
Price: US$5.00

4#3(A/B) Skid Landing
Item No: HM-4#3-Z-11
Price: US$4.00

4#3 Battery Frame
Item No: HM-4#3-Z-12
Price: US$2.50

4#3A/B Battery Frame
Item No: HM-4#3AB-Z-12
Price: US$3.50

4#3(A/B) Tail Gear
Item No: HM-4#3-Z-13
Price: US$2.50

4#3(A/B) Tail Knighthead
Item No: HM-4#3-Z-14
Price: US$2.50

4#3 Servo Holder
Item No: HM-4#3-Z-15
Price: US$2.5
SOLD OUT

4#3A/B Servo Holder
Item No: HM-4#3AB-Z-15
Price: US$3.50

4#3(A/B) Tail Motor Holder
Item No: HM-4#3-Z-16
Price: US$3.50

4#3(A/B) Tail Boom
Item No: HM-4#3-Z-17
Price: US$2.50

 

4#3A/B Main Shaft
(Contain a main axle (shaft), two ORins, and two C-Clips)
Item No: HM-4#3AB-Z-18
Price: US$3.50

4#3 Main Frame
Item No: HM-4#3-Z-18
Price: US$5.50
Sold Out

4#3A/B Main Frame
Item No: HM-4#3AB-Z-19
Price: US$5.50

4#3 Main Gear
Item No: HM-4#3-Z-19
Price: US$4.50

4#3A/B Main Gear
Item No: HM-4#3AB-Z-20
Price: US$4.50

4#3 Canopy
Item No: HM-4#3-Z-20
Price: US$4.00

4#3B Canopy
(Can use on 4#3A)

Item No: HM-4#3B-Z-21
Price: US$4.00

4#3A Canopy
(Can be used on 4#3B)

Item No: HM-4#3A-Z-21
Price: US$4.00

4#3(A/B) Tail Motor Wire
Item No: HM-4#3B-Z-22/
HM-4#3-Z-21
Price: US$2.50

4#3 Bearing Set
Item No: HM-4#3-Z-22
Price: US$4.50

4#3A/B Bearing Set
Item No: HM-4#3AB-Z-23
Price: US$4.50

4#3 Screw Set
Item No: HM-4#3-Z-23
Price: US$2.50

4#3A/B Screw Set
Item No: HM-4#3AB-Z-24
Price: US$2.50

4#3 Servo Set (A pair)
Item No: HM-4#3-Z-24
Price: US$22.00

4#3B Servo Set (A pair)
Item No: HM-4#3B-Z-25
Price: US$22.00

4#3 Main Motor
Item No: HM-4#3-Z-25
Price: US$4.50

4#3A/B Main Motor
Item No: HM-4#3AB-Z-26
Price: US$4.50

 

4#3(A/B) Tail Motor Set
Item No: HM-4#3AB-Z-27/
HM-4#3-Z-26
Price: US$4.50

4#3(A/B) Battery(3.7V 400mAh)
Item No: HM-4#3-Z-28
Price: US$6.50

4#3 Receiver Only 72MHz Available
Item No: HM-4#3-Z-27
Price: US$33.00
SOLD OUT

4#3A/B Receiver (RX2406)
Item No: HM-4#3AB-Z-30
Price: US$33.00

4#3(A/B) Charger(4.2V 500mA)
Item No: HM-4#3-Z-30
Price: US$6.50

   

4#3A/B Transmitter(WK-2401)
Item No: HM-4#3AB-Z-31
Price: US$50.00


Best Heat Sink for Walkera 4#3/A/B Main Motor

Brand New Best Heat Sink for Walkera 4#3/A/B Main Motor
I believe I don't need to introduce this heat sink. Many peoples know this is most popular Canadian Special Made heat sink for 4#3/A/B Main Motor.
This is the best heat sink for 4#3, 4#3A, and 4#3B Main Motor (Not suitable for 5G6 motors).

Item No: CN-Heat-Sink
Price: US$9.50



Xtreme Heat Sink for Walkera 4#3/A/B 5G6 Main Motor

Brand New Xtreme Heat Sink for Walkera 4#3/A/B and 5G6 Main Motor
This is a very high quality heat sink for 4#3, 4#3A, 4#3B, and 5G6 main motor, and it is made in Hong Kong.
Personally, I feel they are pretty useful on my 5G6. Hong Kong is hot, and my 5G6 is not stable according lost power on overheat motor after few minutes flying.
After installed the heat sinks on both motors, my 5G6 does not have such problem any more. By the way, it is not necessary to remove any screw on motor. Just adjust the heat sink and put it on motor. It is so simply, you know how to do it once the heat sink is on your hand.

Item No: XT-Heat-Sink
Price: US$5.00